Life insurance for your watercraft.
Beadlock Pro Marine Ceramic Coating creates a hard-sacrificial barrier which shields your watercraft from the abuse coming from the sun and other harsh elements.
How does it work? Beadlock Pro Marine Ceramic Coating contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass its strength and hardness. This integrated SiO2 technology makes this product far more durable and hydrophobic than any wax or sealant.
Product may be used on gel coats, boat bumper rails, metal surfaces, glass and painted plastic surfaces.
Prep: Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.
Optional step if needed: Polish the surface to reduce any surface defects and create maximum gloss. Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.
Apply: Shake Beadlock Pro well. Apply directly onto the applicator pad and spread product evenly onto the surface. Product will have an “oil slick/rainbow” look to it as it begins to dry. This effect should begin within seconds. Give it a minimum of 60 seconds to set up and then remove using a clean microfiber towel. How do you know it’s ready to be removed? Perform a test spot with your microfiber towel. The coating will have some slight resistance when you wipe. This slight resistance lets you know it’s ready for removal. If you have difficulty removing the product, you waited too long. Using an additional towel, lightly wipe over the area again to ensure product is even and level on the surface. Once you have wiped with the second towel the coating will begin to “set-up”. Do not go back into an area minutes later and re-wipe or you could cause streaking.
- Always use Shine Supply Aftermath water spot remover/detail spray immediately after docking the boat. This will quickly remove the water spots and hydrate the coating.
- For stubborn water spots use Shine Supply Wake-Up ceramic cleaner wax by hand to quickly remove.
- Use Shine Supply Wake-Up ceramic cleaner wax to revive the coating and build up additional protection.